Buick Regal: Engine Coolant Temperature Gauge
.png)
Uplevel Metric
.png)
Uplevel English
This gauge shows the engine coolant temperature.
If the gauge pointer moves toward the warning area at the high end of the gauge, the engine is too hot.
The engine coolant temperature warning light comes on when the engine is too hot. This reading indicates the same thing as the warning light. It means that the engine coolant has overheated. If the vehicle has been operating under normal driving conditions, pull off the road, stop the vehicle, and turn off the engine as soon as possible.
Seat Belt Reminders
Driver Seat Belt Reminder Light
There is a driver seat belt reminder light on the instrument cluster.
.png)
When the vehicle is started, this light flashes and a chime may come on to remind the driver to fasten their seat belt. Then the light stays on solid until the belt is buckled.
This cycle may continue several times if the driver remains or becomes unbuckled while the vehicle is moving.
If the driver seat belt is buckled, neither the light nor the chime comes on.
Passenger Seat Belt Reminder Light
There is a passenger seat belt reminder light near the passenger airbag status indicator.
.png)
When the vehicle is started, this light flashes and a chime may come on to remind passengers to fasten their seat belt. Then the light stays on solid until the belt is buckled.
This cycle continues several times if the passenger remains or becomes unbuckled while the vehicle is moving.
If the passenger seat belt is buckled, neither the chime nor the light comes on.
The front passenger seat belt reminder light and chime may turn on if an object is put on the seat such as a briefcase, handbag, grocery bag, laptop, or other electronic device. To turn off the reminder light and/or chime, remove the object from the seat or buckle the seat belt.
READ NEXT:
Airbag Readiness Light
This light shows if there is an
electrical problem with the airbag
system. The system check includes
the airbag sensor(s), the passenger
sensing system, the pretensioners,
the airbag modules, the wiri
Malfunction Indicator Lamp
(Check Engine Light)
This light is part of the vehicle's
emission control on-board
diagnostic system. If this light is on
while the engine is running, a
malfunction has been detected and
the vehicle may require service. T
Brake System Warning
Light
The vehicle brake system consists
of two hydraulic circuits. If one
circuit is not working, the remaining
circuit can still work to stop the
vehicle. For normal braking
performance, both circuits need
SEE MORE:
DTC B370A
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diagnostic Procedure Instructions provide an overview of each diagnostic
category.
DTC Descriptor
DTC
Rear Wheel Drive Shaft Replacement - Right Side
Special Tools
DT-45859 Axle Remover
Equivalent regional tools: Special Tools
Removal Procedure
1. Raise and support the vehicle.
2. Remove the right rear tire and wheel assembly.
3. With the aid of an assistant holding the brake pedal down, use a breaker bar
and the proper size socket to
loosen
