The exterior lamp control is on the
instrument panel to the left of the
steering column.
There are four positions.
: Turns the exterior lamps off and
deactivates the AUTO mode. Turn
to again to r
When the exterior lamp control is
set to AUTO and it is dark enough
outside, the headlamps come on
automatically.
There is a light sensor on top of the
instrument panel. Do not cover the
sensor; othe
1. Crankshaft Balancer
WARNING: Refer to Safety Glasses Warning.
Procedure
Clean the crankshaft balancer.
Clean the belt grooves of all dirt or debris with a wire brush.
Dry the crankshaft balancer with compressed air.
Inspect the crankshaft balancer for the following:
Worn, grooved, or damag
SPECIFICATIONS
FASTENER SPECIFICATIONS
Single Use Non-Threaded Fasteners/Components
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced
with NEW
after removal.
Application
O-Ring at PTU Output Shaft
O-Ring at Rear Differential Input Shaft
Retaining Ring at PTU Output