Buick Regal Owners & Service Manuals

Buick Regal: Child Restraint Systems

Rear-Facing Infant Restraint Rear-Facing Infant Restraint

A rear-facing child restraint provides restraint with the seating surface against the back of the infant.

The harness system holds the infant in place and, in a crash, acts to keep the infant positioned in the restraint.

Forward-Facing Child Restraint Forward-Facing Child Restraint

A forward-facing child restraint provides restraint for the child's body with the harness.

Booster Seats Booster Seats

A belt-positioning booster seat is used for children who have outgrown their forward-facing child restraint. Boosters are designed to improve the fit of the vehicle's seat belt system until the child is large enough for the vehicle seat belts to fit properly without a booster seat.

Securing an Add-On Child Restraint in the Vehicle

Warning: A child can be seriously injured or killed in a crash if the child restraint is not properly secured in the vehicle. Secure the child restraint properly in the vehicle using the vehicle's seat belt or LATCH system, following the instructions that came with that child restraint and the instructions in this manual.

To help reduce the chance of injury, the child restraint must be secured in the vehicle. Child restraints must be secured in vehicle seats by lap belts or the lap belt portion of a lap-shoulder belt, or by the LATCH system.

Children can be endangered in a crash if the child restraint is not properly secured in the vehicle.

When securing an add-on child restraint, refer to the instructions that come with the restraint which may be on the restraint itself or in a booklet, or both, and to this manual.

The child restraint instructions are important, so if they are not available, obtain a replacement copy from the manufacturer.

Keep in mind that an unsecured child restraint can move around in a collision or sudden stop and injure people in the vehicle. Be sure to properly secure any child restraint in the vehicle- even when no child is in it.

In some areas of the United States and Canada, Certified Child Passenger Safety Technicians (CPSTs) are available to inspect and demonstrate how to correctly use and install child restraints. In the U.S., refer to the National Highway Traffic Safety Administration (NHTSA) website to locate the nearest child safety seat inspection station. For CPST availability in Canada, check with Transport Canada or the Provincial Ministry of Transportation office.

Securing the Child Within the Child Restraint

Warning: A child can be seriously injured or killed in a crash if the child is not properly secured in the child restraint. Secure the child properly following the instructions that came with that child restraint.

    READ NEXT:

     Where to Put the Restraint

    According to accident statistics, children and infants are safer when properly restrained in an appropriate child restraint secured in a rear seating position. Whenever possible, children aged 12 and

     Lower Anchors and Tethers for Children (LATCH System)

    The LATCH system secures a child restraint during driving or in a crash. LATCH attachments on the child restraint are used to attach the child restraint to the anchors in the vehicle. The LATCH syste

     Securing a Child Restraint Designed for the LATCH System

    Warning: A child could be seriously injured or killed in a crash if the child restraint is not properly attached to the vehicle using either the LATCH anchors or the vehicle seat belt. Follow the inst

    SEE MORE:

     Rear Suspension 4 Corner Air Leveling Position Sensor Replacement (CNQ)

    Removal Procedure 1. Remove the rear tire and wheel assembly. 2. Separate the rear suspension 4 corner air leveling position sensor harness clip from the underbody rear side rail. 3. Electrical Connector@Rear Suspension 4 Corner Air Leveling Position Sensor - Disconnect. 4. Link Rod (1)@Ball

     Camshaft Position Actuator and Camshaft Replacement - Exhaust

    Special Tools EN-50656 Holding Tool EN 50793 Locking Tool For equivalent regional tools, refer to Special Tools. Removal Procedure NOTE: Ensure the engine is properly timed to Top Dead Center (TDC), prior to performing repairs. 1. Remove the camshaft cover. Refer to Camshaft Cover Replacement.

    © 2019-2024 Copyright www.buregal6.com