TRANSMISSION FLUID COOLER FLOW TEST AND FLUSHING (6T50)
GM studies indicate that plugged or restricted transmission oil coolers and
pipes cause insufficient
transmission lubrication and elevated ope
Special Tools
DT - 45096 TransFlow Cooler Flush Machine
DT - 45096 - 30 TransFlow Adapter
For equivalent regional tools, refer to Special Tools.
GM studies indicate that plugged or restricted tra
General Method
1. Verify that the leak is transmission fluid.
2. Thoroughly clean the suspected leak area.
3. Operate the vehicle for 24 km (15 mi), or until normal operating temperatures
are reached.
4. Park the vehicle over clean paper or cardboard.
5. Shut OFF the engine.
6. Look for fluid
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diagnostic Procedure Instructions provides an overview of each
diagnostic category.
DTC Descriptor
DT