Buick Regal: Driver Information Center (DIC)
The DIC displays are shown in the center of the instrument cluster in the Info app. The displays show the status of many vehicle systems.
.png)
.png)
or
.png)
: Press to move up or
down in a list.
.png)
or
.png)
: Press to move between
the interactive display zones in the
cluster.
.png)
: Press to open a menu or select
a menu item. Press and hold to
reset values on certain screens.
Base Level DIC
Use .png)
or
.png)
to choose the Trip,
Vehicle, or Eco menus. Use .png)
or
.png)
to scroll through items in
each menu.
Trip/Fuel Menu (TRIP) Items
Speed : Displays how fast the vehicle is moving in either kilometers per hour (km/h) or miles per hour (mph). The speedometer cannot be reset.
Trip 1 or Trip 2, Average Fuel
Economy : Displays the current distance traveled, in either kilometers (km) or miles (mi), from the last reset for the trip odometer.
The trip odometer can be reset to
zero by pressing and holding .png)
while the trip odometer display is
showing.
Also displays the approximate
average liters per 100 kilometers
(L/100 km) or miles per gallon (mpg). This number is based on the
number of L/100 km (mpg) recorded
since the last time this menu item
was reset. This number reflects only
the approximate average fuel
economy that the vehicle has right
now, and will change as driving
conditions change. Reset the
average consumption by pressing
when it is displayed.
Fuel Range : Displays the approximate distance the vehicle can be driven without refueling. The fuel range estimate is based on an average of the vehicle's fuel economy over recent driving history and the amount of fuel remaining in the fuel tank. Fuel range cannot be reset.
Average Vehicle Speed : Displays
the average vehicle speed of the
vehicle in kilometers per hour (km/h)
or miles per hour (mph). This
average is based on the various
vehicle speeds recorded since the
last reset. Reset the average speed
by pressing when it is displayed.
Timer : To start the timer, press
while Timer is displayed. The
display will show the amount of time
that has passed since the timer was
last reset, not including time the
ignition is off. Time will continue to
be counted as long as the ignition is
on, even if another display is being
shown on the DIC. The timer will
record up to 99 hours, 59 minutes,
and 59 seconds (99:59:59) after
which the display will return to zero.
To stop the timer, press briefly
while Timer is displayed. To reset
the timer to zero, press and hold .
Navigation : Used for the OnStar Turn-by-Turn guidance.
Blank Display : Displays no information.
READ NEXT:
Vehicle Information Menu
(VEHICLE) Items
Units : Choose between Metric or
US when Units is active. Press to
confirm the setting. This will change
the displays on the DIC to the type
of measurements you select.
Speed Warning : This display i
Uplevel DIC
DIC Info Page Options
The info pages on the DIC can be
turned on or off through the
Options menu.
1. Press to access the cluster
applications.
2. Press or
to scroll to the
Options application.
3
Head-Up Display (HUD)
Warning:
If the HUD image is too bright or
too high in your field of view, it
may take you more time to see
things you need to see when it is
dark outside. Be sure to keep the
HUD image dim and placed
SEE MORE:
Engine Cranks But Does Not Run
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diagnostic Procedure Instructions provides an overview of each
diagnostic category.
Circuit/System De
Crankshaft Balancer Cleaning and Inspection
1. Crankshaft Balancer
WARNING: Refer to Safety Glasses Warning.
Procedure
Clean the crankshaft balancer.
Clean the belt grooves of all dirt or debris with a wire brush.
Dry the crankshaft balancer with compressed air.
Inspect the crankshaft balancer for the following:
Worn, grooved, or damag
