Instrument Panel Overview
Air Vents
Turn and Lane-Change Signals
Instrument Cluster
Driver Information Center (DIC)
Display
Windshield Wiper/Washer
Hazard Warning Flashers
Light Sensor
In
The vehicle may be equipped with a
fuel saving Stop/Start system to
shut off the engine and help
conserve fuel.
When the brakes are applied and
the vehicle is at a complete stop,
the engine may turn
Removal Procedure
1. Raise and support the vehicle.
2. Place a drain pan under the vehicle.
3.
Oil Pan Drain Plug (1) - Remove.
4. Oil Pan Drain Plug Seal (2) - Remove and DISCARD.
5. Drain the engine oil into a suitable container.
6.
Remove and DISCARD the oil filter. (1)
7. Ensure that the
Removal Procedure
1. Prepare the control module for removal using the SPS programming support
tool.
NOTE: The rear differential clutch control module can now be removed
and replaced.
2. Raise and support the vehicle.
3. Differential Carrier Assembly - Drain.
4. Propeller Shaft - Remove.
5. Exhaust