Buick Regal: Traction Control/Electronic Stability Control
The Traction Control System (TCS) limits wheel slip. The system turns on automatically every time the vehicle is started.
The StabiliTrak system assists with directional control of the vehicle in difficult driving conditions. The system turns on automatically every time the vehicle is started.
- To turn off TCS, press and
release
.png)
on the center stack..png)
illuminates and the
appropriate Driver Information
Center (DIC) message may
display. - To turn TCS on again, press and
release .
- To turn off both TCS and
StabiliTrak, press and hold
until and
illuminate in the
instrument cluster. A DIC
message may display.
- Press and release to turn
on
both systems.
Tire Pressure Monitor
This vehicle may have a Tire Pressure Monitor System (TPMS).
.png)
The low tire pressure warning light alerts to a significant loss in pressure of one of the vehicle's tires. If the warning light comes on, stop as soon as possible and inflate the tires to the recommended pressure shown on the Tire and Loading Information label. The warning light will remain on until the tire pressure is corrected.
The low tire pressure warning light may come on in cool weather when the vehicle is first started, and then turn off as the vehicle is driven. This may be an early indicator that the tire pressures are getting low and the tires need to be inflated to the proper pressure.
The TPMS does not replace normal monthly tire maintenance. Maintain the correct tire pressures.
READ NEXT:
Fuel (2.0L Turbo Engine)
Premium Recommended Fuel
Use premium 93 octane unleaded
gasoline in your vehicle. Unleaded
gasoline with an octane rating as
low as 87 may be used, but it will
reduce performance and fuel
economy.
Fu
Engine Oil Life System
The engine oil life system calculates
engine oil life based on vehicle use
and displays the CHANGE ENGINE
OIL SOON message when it is time
to change the engine oil and filter.
The oil life system sho
SEE MORE:
DTC P0729-P0735, P076F, or P07D9
Diagnostic Instructions
Perform the Diagnostic System Check prior to using this diagnostic
procedure: Refer to Diagnostic System
Check - Vehicle
Review the description of Strategy Based Diagnosis:Strategy Based
Diagnosis
An overview of each diagnostic category can be found here: Refer to
Symptoms - Lighting
NOTE: The following steps must be completed before using a symptom
table.
1. Perform the Diagnostic System Check - Vehicle before using a symptom table
in order to verify
that all of the following conditions are true:
There are no DTCs set.
The control modules can communicate via the serial dat
