Buick Regal: Navigation
OnStar navigation requires a specific OnStar service plan.
Press .png)
to receive Turn-by-Turn
directions or have them sent to the
vehicle's navigation screen,
if equipped.
Turn-by-Turn Navigation
1. Press to connect to an
Advisor.
2. Request directions to be downloaded to the vehicle.
3. Follow the voice-guided commands.
Using Voice Commands During a Planned Route
Functionality of the Voice Command
button may vary by vehicle and
region. For some vehicles, press .png)
to open the OnStar app on the
infotainment display. For other
vehicles press .png)
as follows.
Cancel Route
1. Press . System responds:
"OnStar ready," then a tone.
2. Say "Cancel route." System responds: "Do you want to cancel directions?"
3. Say "Yes." System responds: "OK, request completed, thank you, goodbye."
Route Preview
1. Press . System responds:
"OnStar ready," then a tone.
2. Say "Route preview." System responds with the next three maneuvers.
Repeat
1. Press . System responds:
"OnStar ready," then a tone.
2. Say "Repeat." System responds with the last direction given, then responds with "OnStar ready," then a tone.
Get My Destination
1. Press . System responds:
"OnStar ready," then a tone.
2. Say "Get my destination." System responds with the address and distance to the destination, then responds with "OnStar ready," then a tone.
Send Destination to Vehicle
Directions can be sent to the vehicle's navigation screen, if equipped.
Press .png)
, then ask the Advisor to
download directions to the vehicle's
navigation system, if equipped. After
the call ends, the navigation screen
will provide prompts to begin driving
directions. Routes that are sent to
the navigation screen can only be
canceled through the navigation
system.
READ NEXT:
Connections
The following OnStar services help
with staying connected.
Ensuring Security
Change the default passwords
for the Wi-Fi hotspot and
myBuick mobile application.
Make these passwords different
fro
OnStar Smart Driver
OnStar Smart Driver provides
information about driving behavior to
help maximize overall vehicle
performance, reduce wear and tear,
and enhance fuel efficiency. An
Insurance Discounts Eligibility
feat
SEE MORE:
DTC P0128
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diagnostic Procedure Instructions provides an overview of each
diagnostic category.
DTC Descriptor
DT
Symptoms - Mirrors
NOTE: The following steps must be completed before using the symptom
tables.
1. Perform the Diagnostic System Check - Vehicle before using the Symptom
Tables in order to
verify that all of the following are true:
There are no DTCs set.
The control modules can communicate via the serial data lin
