If equipped, these buttons are in the
overhead console.
This system can replace up to three
remote control transmitters used to
activate devices such as garage
door openers, security systems, and
ho
Using the Universal Remote
System
Press and hold the appropriate
Universal Remote system button for
at least one-half second. The
indicator light will come on while the
signal is being transmitted.
Er
Calibration Criteria
NOTE: Do not apply the brake pedal during the brake pedal position
sensor
calibration procedure. Any movement of the brake pedal during this
procedure will cause the calibration procedure to fail. If this occurs, the
brake pedal position sensor calibration must be repeated.
Bra
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diagnostic Procedure Instructions provides an overview of each
diagnostic category.
DTC Descriptor
DT