SCHEMATIC AND WIRING DIAGRAMS
ACTIVE NOISE CANCELLATION WIRING SCHEMATICS
Active Noise Cancellation (UQ3)
Active Noise Cancellation (UQA)
Diagnostic Information and Procedures
DTC B0560
Diagnostic
1.
Remove the oil filter (1). Remove the oil pan drain plug and allow the oil to
drain out.
2. Clean the oil filter housing in the engine block.
CAUTION: Refer to Fastener Caution.
3. Install the oil pan drain plug and tighten to 25 N.m (18 lb ft).
4. If cleaning or repairing the engine block, i
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Refer to Diagnostic Procedure Instructions for an overview of each
diagnostic category.
DTC Descripto