Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diag
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diag
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diag
Removal Procedure
1. Raise and support the vehicle.
2. Place a drain pan under the vehicle.
3.
Oil Pan Drain Plug (1) - Remove.
4. Oil Pan Drain Plug Seal (2) - Remove and DISCARD.
5. Drain the engine oil into a suitable container.
6.
Remove and DISCARD the oil filter. (1)
7. Ensure that the
NOTE: This procedure is not used in Europe.
Special Tools
EN-43953 Ring Compressor - 86 mm
EN-43966 Connecting Rod Guides
EN 45059 Angle Meter
For equivalent regional tools, refer to Special Tools.
1.
Ensure the piston ring end gaps are positioned 90 degrees to each other.
Upper compression