Buick Regal 2018-2025 Service Manual / Engine / Engine Mechanical - 2.0L (LTG) / Diagnostic Information and Procedures
Buick Regal: Diagnostic Information and Procedures
- DTC P06DA-P06DC
- DTC P06DD or P06DE
- Symptoms - Engine Mechanical
- Coolant in Combustion Chamber
- Cylinder Leakage Test
- Drive Belt Chirping, Squeal, and Whine Diagnosis
READ NEXT:
DTC P06DA-P06DC
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diag
DTC P06DD or P06DE
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diag
Symptoms - Engine Mechanical
Strategy Based Diagnostics
1. Perform the Diagnostic System Check - Vehicle before using the symptom
tables, if applicable.
2. Review the system operations in order to familiarize yourself with the
SEE MORE:
Engine Block Assemble
1.
Install the piston oil nozzle assemblies (2), if equipped.
CAUTION: Refer to Fastener Caution.
2. Install the piston oil nozzle bolts (1) and tighten to 10 N.m (89 lb in).
3.
Lubricate the crankshaft position sensor O-ring with engine oil. Refer to
Adhesives, Fluids, Lubricants, and
Sealers.
Intake Manifold Installation
Special Tools
EN-45059 Angle Meter
EN-50790 HP Fuel Pump Installation Alignment Gauge
For equivalent regional tools, refer to Special Tools.
1.
Install a NEW gasket (1) on the intake manifold (3). Install the intake
manifold and hand start the intake
manifold bolts (2, 4).
2.
CAUTION: Refer
© 2019-2025 Copyright www.buregal6.com
